Lashing System/ Load Securement Polyester Synthetic Slings Wire Ropes Wire Rope Accessories Stainless Steel Products Chain Links Fittings Shackles Beam Clamp Hoists Snatch Blocks Lifting Clamp Hand Tools and Others Cable Installation Tools Turnbuckles Ropes Fall Protection and PPE

Wah Yong (M) Sdn Bhd
24, Jalan Mega 1/7,
Taman Perindustrian
Nusa Cemerlang
Iskandar Puteri,
79200 Johor, Malaysia.
+607-535 3380

Fittings > Lifting Points


G80 D Ring With Spring DRS Type

G80 D Ring With Spring DRS Type

G80 D Ring With Spring DRS Type

Brand: H-LIFT
Capacity: 3.15T, 5.3T, 8T, 10T & 15T
  • Weld on plain surfaces as a lifting point, or t be used as a fixed anchor points for spreader beam attachment.
  • Can also be used as an anchor point for load restraint applications.
  • DRS type is equipped with a spring which enables the D ring to stay in the desired position.
  • Quenched and tempered.
  • 100% magnaflux crack detection.
  • Standard: EN1677
  • Material: Forged alloy steel
  • Proof load at 2.5 times of the working load limit.
  • Safety factor 4:1
  • Powder coated surface finish.


Weld-On Point With Spring Code "DAA"

Weld-On Point With Spring Code "DAA"

Weld-On Point With Spring Code ''DAA''

Brand: YOKE
Capacity: 3T
  • Designed with spring, stop at any angle.
  • Pivots through 180°.
  • Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


Bolt-On Tie Down Code "DAB"

Bolt-On Tie Down Code "DAB"

Bolt-On Tie Down Code ''DAB'' 

Brand: YOKE
Capacity: 5T
  • Designed with spring, stop at any angle .
  • Pivots 180° side loading allowed.
  • Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • Design factor 5:1
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


Excavator Weld-On Hook

Excavator Weld-On Hook

Excavator Weld-On Hook

Brand: YOKE
Capacity: 2T, 3T, 4T, 5T & 8T
  • Design factor 4:1 proof tested and certified.
  • Tested acc. to EN 1677


G80 Lifting Swivel LTS Type, Metric Thread

G80 Lifting Swivel LTS Type, Metric Thread

G80 Lifting Swivel LTS Type, Metric Thread

Brand: H-LIFT
  • Compact and lightweight design with metric thread.
  • Only be fitted on the assembly for lifting use.
  • Can use as lashing point for the fixture of lashing.
  • Quenched and tempered.
  • 100% magnaflux crack detection.
  • Standard: EN1677
  • Material: Forged alloy steel
  • Proof load at 2.5 times of the working load limit.
  • Safety factor 4:1
  • Powder coated surface finish.


Lifting Point Metric Thread 8-211

Lifting Point Metric Thread 8-211

Lifting Point Metric Thread

Brand: YOKE
  • Rotates through 360° and pivot 90°.
  • Manufactured from alloy steel, quenched and tempered.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


Anchor Point Metric Thread 8-231

Anchor Point Metric Thread 8-231

Anchor Point Metric Thread

Brand: YOKE
  • Rotates through 360° and pivot 180°, and simultaneously allows lifting from any direction.
  • Manufactured from alloy steel, quenched and tempered.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


Swivel Point Metric Thread 8-271

Swivel Point Metric Thread 8-271

Swivel Point Metric Thread
Brand: YOKE
  • Pivots more than 230°, rotates through 360° due to its unique ball bearing design. Design factor 4:1 in all directions.
  • Manufactured from alloy steel, quenched and tempered.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


G80 Eye Bolt EBL Type

G80 Eye Bolt EBL Type

G80 Eye Bolt EBL Type

Brand: H-LIFT
  • Sizes are based on DIN 580 eye bolt.
  • WLL for vertical lifting is marked on the eye.
  • DRS type is equipped with a spring which enables the D ring to stay in the desired position.
  • Quenched and tempered.
  • 100% magnaflux crack detection.
  • Standard: EN1677
  • Material: Forged alloy steel
  • Proof load at 2.5 times of the working load limit.
  • Safety factor 4:1
  • Powder coated surface finish.


Key Eye Point Metric Thread

Key Eye Point Metric Thread

Key Eye Point Metric Thread

Brand: YOKE
  • Rotates through 360° adjustable in the direction of the load.
  • Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
  • Manufactured and tested in accordance with EN1677-1.
  • Load rated parts are 100% magnaflux crack detected.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolts are Metric thread (ASME / ANSI B18.3.1M)
  • Proof tested to 2.5 times the WLL.
  • Fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.


Swivel Hoist Ring with ball bearing

Swivel Hoist Ring with ball bearing

Swivel Hoist Ring with ball bearing

Brand: YOKE
  • Designed for lifting heavy loads.
  • Rotates freely through 360° and make it easy to handle and turns it automatically in direction of load.
  • Rotates through 360° and pivot 180°, rated at 100% at 90°angle.​
  • Easy to install - needs only one tap hole
  • Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor.
  • 20,000 cycle fatigue rated to 1.5 times the WLL.​
  • Self aligns in direction of load.
  • L - Long Bolts are designed for soft metal work piece.

Metric Thread (8-201)


UNC Thread (8-202)


Swivel Hoist Ring with alloy steel washer

Swivel Hoist Ring with alloy steel washer

Swivel Hoist Ring with alloy steel washer

Brand: YOKE
  • Rotates through 360° and pivot 180°, rated at 100% at 90°angle.
  • Manufactured from forged alloy steel, quenched and tempered.
  • Manufactured and tested in accordance with EN1677-1.
  • Individual forged parts and cap screw are traceable to Test Certification.
  • Bolt are UNC thread (ASME/ ANSI B18.31M).
  • Proof tested to 2.5 times the WLL.
  • 20,000 cycle fatigue rated to 1.5 times the WLL.
  • All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
  • Quick and simple assembly, just a tapped hole is required.
Metric Thread (8-203)


UNC Thread (8-204)

 


G80 Eye Swivel

G80 Eye Swivel

G80 Eye Swivel

Brand: YOKE
  • Design factor 4:1 proof tested and certified.
  • Tested acc. to EN 1677


G80 Precast Concrete Lifting Clutch LTC Type

G80 Precast Concrete Lifting Clutch LTC Type

G80 Precast Concrete Lifting Clutch LTC Type

To lift and transport precast concreate elements
Brand: H-LIFT
  • Standard EN1677
  • Quenched and tempered.
  • 100% Magnaflux Crack Detection
  • Proof Load tested at 2.5 times the WLL.
  • Safety Factor 4:1.
  • Powder coated or zinc plated surface finished.