Links
Connecting Link are universal, can be used with chain, master links, hooks and other lifting components and wire ropes as well. It is simple to assembly, just a few minute with a hammer and punch only.
G80 European Type Master Link Assembly, MAU Type

G80 European Type Master Link Assembly, MAU Type
Brand: H-LIFT
Capacity: 4.25T, 6.7T, 11.2T, 45T & 63T
-
Standard EN1677
-
Quenched and Tempered Alloy Steel.
-
Powder coated surface finished.
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Engineered flat, suitable for omega links.
G80 Oblong Master Link, Code "MF"

G80 Oblong Master Link, Code ''MF''
Connected to Chain with ''YA'' connecting link.
Brand: YOKE
Capacity: 2.5T
-
Standard EN1677
-
Design Factor 4:1.
-
Forged Oblong Master Links.
-
Extra width inside allows better works on large crane hooks.
G80 Clevis Master Link

G80 Clevis Master Link
Brand: YOKE
Capacity: 2T, 3.15T, 5.3T & 8T
-
Standard EN1677
-
Design Factor 4:1.
G80 European Type Master Link, MLU Type

G80 European Type Master Link, MLU Type
Brand: H-LIFT
Capacity: 2.12T, 3.15T, 5.3T, 8T, 11.2T, 17T, 31.5T, 45T & 56T
-
Standard EN1677
-
Quenched and Tempered Alloy Steel.
-
Powder coated surface finished.
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Engineered flat, suitable for omega links.
G80 Connecting Link, Code "YA"

G80 Connecting Link, Code ''YA''
Brand: YOKE
Capacity: 1.12T, 2T, 3.15T, 5.3T, 8T, 12.5T, 15T, 21.2T & 31.5T
-
Standard EN1677
-
Design Factor 4:1.
G80 Web Sling Connector

G80 Web Sling Connector
Brand: YOKE
Capacity: 1.12T, 2T, 3.15T, 5.3T, 8T, 12.5T, 15T, 21.2T & 31.5T
-
Standard EN1677
-
Design Factor 4:1.
G80 European Type Connecting Link, CNL Type

G80 European Type Connecting Link, CNL Type
Brand: H-LIFT
Capacity: 3.15T, 5.3T, 8T & 31.5T
-
Standard EN1677
-
Quenched and tempered forged alloy steel.
-
Powder coated surface finished.
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
G80 Connecting Link

G80 Connecting Link
Brand: JULI / HARU
Capacity: 1.5T, 2T, 3.15T, 5.3T, 8T, 11.2T, 15T, 21.2T & 31.5T
-
Adopt high-quality alloy steel.
-
Proof Load tested at 2.5 times the WLL.
-
Heat treated.
-
Safety Factor 4:1.
X-007 Welded Master Link Assembly

X-007 Welded Master Link Assembly
Grade100 Lifting Chain Fittings
Brand: YOKE
Capacity: 17T, 23.6T & 28.1T
-
Quenched and Tempered Alloy Steel.
-
At least 25% greater WLL than traditional G80 products.
-
Manufactured in accordance with ASTM A952/A952M, ASME B30.9, ASME B30.26, EN 1677-4 and OSHA 1910.184.
-
Certified by DGUV GS-OA-15-05.
-
Proof Load tested at 2.5 times the WLL.
-
Design Factor 5:1.
-
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
-
Tempering temperature at a minimum of 400°C.
-
Welded Master Link designed for 3-4 legs Chain, Wire Rope and Webbing Slings.
-
Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.
G100 Master Link Assembly MLY Type

G100 Master Link Assembly MLY Type
Brand: H-LIFT
Capacity: 3T, 5.3T, 8T, 14T, 21.2T, 33.6T & 39.9T
-
Standard EN1677
-
Quenched and Tempered Alloy Steel.
-
Powder coated surface finished.
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Engineered flat, suitable for omega links.
G100 Master Link, MLF Type

G100 Master Link, MLF Type
Brand: H-LIFT
Capacity: 2.3T, 3.5T, 5T, 7.6T, 10T, 14T, 25.1T & 30.8T
-
Standard EN1677
-
Quenched and Tempered Alloy Steel.
-
Powder coated surface finished.
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Engineered flat, suitable for omega links.
G100 Connecting Link

G100 Connecting Link
Brand: H-LIFT
Capacity: 1.4T, 2.5T, 4T, 6.7T, 10T, 16T & 19T
-
At least 25% greater WLL than traditional G80 products.
-
Quenched and tempered forged alloy steel
-
100% Magnaflux Crack Detection
-
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
-
Standard EN1677
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Powder coated surface finished.
G100 Omega Link

G100 Omega Link
Brand: H-LIFT
Capacity: 1.4T, 2.5T, 4T & 6.7T
-
At least 25% greater WLL than traditional G80 products.
-
Quenched and tempered forged alloy steel
-
100% Magnaflux Crack Detection
-
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
-
Standard EN1677
-
Proof Load tested at 2.5 times the WLL.
-
Safety Factor 4:1.
-
Powder coated surface finished.
DA Master Link Assembly

DA Master Link Assembly
Specially designed, manufactured and tested for the operating in the offshore container industry.
Brand: YOKE
Capacity: 8.9T & 12.9T
-
Welded alloy steel, quenched and tempered.
-
Tested and manufactured in accordance with DNV GL ST-2.7-1, EN 1677-4, ASME B30.26.
-
Certified by DNV GL ST-2.7-1.
-
Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).
-
Charpy tested in accordance with DNV GL ST-2.7-1.
-
Proof Load tested to 2.5 times the Working Load Limit (WLL).
-
Design factor 5:1.
-
Charpy test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.
-
Charpy test of 27 joules (20ft. lbs.) at -40°C (-40°F) for welded section.
-
Engineered flat, suitable for omega links
DA Oblong Master Link

DA Oblong Master Link
Specially designed, manufactured and tested for the operating in the offshore container industry.
Brand: YOKE
Capacity: 38.3T
-
Tested and manufactured in accordance with DNV GL ST-2.7-1, EN 1677-4, ASME B30.26.
-
Certified by DNV GL ST-2.7-1.
-
Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).
-
Proof Load tested to 2.5 times the Working Load Limit (WLL).
-
Design factor 5:1.
-
Charpy test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.
-
Charpy test of 27 joules (20ft. lbs.) at -40°C (-40°F) for welded section.
-
Engineered flat, suitable for omega links
DA Master Link

DA Master Link
Specially designed, manufactured and tested for the operating in the offshore container industry.
Brand: YOKE
Capacity: 24T
-
Welded alloy steel, quenched and tempered.
-
Tested and manufactured in accordance with DNV GL ST-2.7-1, EN 1677-4, ASME B30.26.
-
Certified by DNV GL ST-2.7-1.
-
Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).
-
Proof Load tested to 2.5 times the Working Load Limit (WLL).
-
Design factor 5:1.
-
Charpy test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.
-
Charpy test of 27 joules (20ft. lbs.) at -40°C (-40°F) for welded section.
-
Engineered flat, suitable for omega links