Lashing System/ Load Securement Polyester Synthetic Slings Wire Ropes Wire Rope Accessories Stainless Steel Products Chain Links Fittings Shackles Beam Clamp Hoists Snatch Blocks Lifting Clamp Hand Tools and Others Cable Installation Tools Turnbuckles Ropes Fall Protection and PPE

Wah Yong (M) Sdn Bhd
24, Jalan Mega 1/7,
Taman Perindustrian
Nusa Cemerlang
Iskandar Puteri,
79200 Johor, Malaysia.
+607-535 3380

Shackles

Most common connecter which consist of a bow or anchor(dee) type and screw or bolt pin depending on the application use. Shackles can be joined as permanently or temporary based on the requirements ( to connect with chain, polyester sling, wire rope and other fittings.)
 
Wah Yong offers from 0.33 tons to 200 tons, either forged alloy or forged carbon steel.
 


Stainless Steel Shackles D-Type Screw Pin

Stainless Steel Shackles D-Type Screw Pin

Stainless Steel Shackles D-Type Screw Pin

Size: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 13mm, 16mm & 19mm


Stainless Steel Shackles Bow Type Screw Pin

Stainless Steel Shackles Bow Type Screw Pin

Stainless Steel Shackles Bow Type Screw Pin

Size: 5mm, 6mm, 8mm, 10mm, 12mm, 13mm & 16mm 



Bow Shackle With Bolt Pin YOKE 8-808 (G-2130 BX)

Bow Shackle With Bolt Pin YOKE 8-808 (G-2130 BX)

Bow Shackle With Bolt Pin YOKE 8-808 (G-2130 BX)

Forged Alloy Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Bolt Pin YOKE 8-838 (G-2130)

Bow Shackle With Bolt Pin YOKE 8-838 (G-2130)

Bow Shackle With Bolt Pin YOKE 8-838 (G-2130)

Forged Carbon Steel Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Bolt Pin Grade 6 DA-838 Shackle

Bow Shackle With Bolt Pin Grade 6 DA-838 Shackle

Bow Shackle With Bolt Pin Grade 6 DA-838 Shackle

For offshore lifting application
Brand: YOKE
  • Forged Carbon steel, quenched and tempered.
  • Tested and manufactured in accordance with DNV GL ST-2.7-1, DNV GL-ST-0378, EN 13889, ASME B30.26, U.S. Fed. Spec. RR-C-271F Type IVA, Grade A, Class 3.
  • Certified by DNV GL ST-2.7-1.
  • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).
  • Charpy tested in accordance with DNV GL ST-2.7-1.
  • Hot dip galvanized.
  • Charpy test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.


Bow Shackle With Bolt Pin Grade S6 Shackle (G2130BX)

Bow Shackle With Bolt Pin Grade S6 Shackle (G2130BX)

Bow Shackle With Bolt Pin Grade S6 Shackle (G2130BX)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.


Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Forged Alloy Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Forged Carbon Steel Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.


D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

Forged Alloy Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

Forged Carbon Steel Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.


D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

Forged Alloy Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

Forged Carbon Steel Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load, the minimum breaking load is 6 times of the WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.