Lashing System/ Load Securement Polyester Synthetic Slings Wire Ropes Wire Rope Accessories Stainless Steel Products Chain Links Fittings Shackles Beam Clamp Hoists Snatch Blocks Lifting Clamp Hand Tools and Others Cable Installation Tools Turnbuckles Ropes Fall Protection and PPE

Wah Yong (M) Sdn Bhd
24, Jalan Mega 1/7,
Taman Perindustrian
Nusa Cemerlang
Iskandar Puteri,
79200 Johor, Malaysia.
+607-535 3380

Shackles > Bow Shackle with Screw Pin


Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Bow Shackle With Screw Pin YOKE 8-807 (G-209 BW)

Forged Alloy Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Forged Carbon Steel Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.