Lashing System/ Load Securement Polyester Synthetic Slings Wire Ropes Wire Rope Accessories Stainless Steel Products Chain Links Fittings Shackles Beam Clamp Hoists Snatch Blocks Lifting Clamp Hand Tools and Others Cable Installation Tools Turnbuckles Ropes Fall Protection and PPE

Wah Yong (M) Sdn Bhd
24, Jalan Mega 1/7,
Taman Perindustrian
Nusa Cemerlang
Iskandar Puteri,
79200 Johor, Malaysia.
+607-535 3380

Shackles > D Shackle with Bolt Pin


D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

Forged Alloy Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

Forged Carbon Steel Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.


D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.