G100 Clevis Foundary Hook

G100 Clevis Foundary Hook

• Design factor 4:1 proof tested and certified.

G100 Cradle Eye Grab Hook, EGK Type

G100 Cradle Eye Grab Hook, EGK Type

• Use for shortening chain legs.
• To be attached to the master link with the same connecting link as the chain.
• No reduction of WLL due to the supporting cradle in saddle of the hook.
• Approximately 25% stronger than G80.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Fatigue tested at 1.5 times the working load limit for 20,000 cycles.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

G100 Eye Sling Hook With Latch, ESH Type

G100 Eye Sling Hook With Latch, ESH Type

• Comes with spring-loaded safety latch.
• Approximately 25% stronger than G80.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Fatigue tested at 1.5 times the working load limit for 20,000 cycles.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

G100 Eye Self Locking Hook, ESK Type

G100 Eye Self Locking Hook, ESK Type

• Hooks will not open when under load as the latch close automatically.
• Approximately 25% stronger than G80.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Fatigue tested at 1.5 times the working load limit for 20,000 cycles.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

G100 Eye Self Locking Hook

G100 Eye Self Locking Hook

• Design factor 4:1 proof tested and certified.

G100 Eye Grip Safe Locking Hook

G100 Eye Grip Safe Locking Hook

• Design factor 4:1 proof tested and certified.

G100 Swivel Self Locking Hook With bearing, SSB Type

G100 Swivel Self Locking Hook With bearing, SSB Type

• Ensure better load attachment thanks to the rotating element.
• Swivel eye allows for 360-degree rotation before load is applied.
• Hook that will not open when under load as the latch close automatically.
• Can rotate easily also with full load.
• Approximately 25% stronger than G80.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

G100 Swivel Grip Safe Locking Hook

• Design factor 4:1 proof tested and certified Tested acc. to EN 1677

Send us an enquiry ...

DA Eye Self Locking Hook

DA Eye Self Locking Hook

• Designed in a way to solve your synthetic end-fitting problems.
• The Round Shape is designed to provide great protection to your synthetic round sling on every loading.
• Offer complete range of hooks from 1 ton up to 21.2 tons.
• Assembly is fast and easy with only a hammer required.
• The hook with Self Locking function meets real safe and safer required.
• Design factor 4:1 proof tested and certified.

Send us an enquiry ...

G80 D Ring With Spring DRS Type

G80 D Ring With Spring DRS Type

• Weld on plain surfaces as a lifting point, or t be used as a fixed anchor points for spreader beam attachment.
• Can also be used as an anchor point for load restraint applications.
• DRS type is equipped with a spring which enables the D ring to stay in the desired position.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

Weld-On Point With Spring Code "DAA"

Weld-On Point With Spring Code ''DAA''

• Designed with spring, stop at any angle.
• Pivots through 180°.
• Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

Bolt-On Tie Down Code "DAB"

Bolt-On Tie Down Code ''DAB'' 

• Designed with spring, stop at any angle .
• Pivots 180° side loading allowed.
• Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• Design factor 5:1
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

Excavator Weld-On Hook

Excavator Weld-On Hook

• Design factor 4:1 proof tested and certified.
• Tested acc. to EN 1677

G80 Swivel Lifting Point​

G80 Swivel Lifting Point​

• Compact and lightweight design with metric thread.
• Rotates through 360° and pivot 90°
• Quenched and tempered.
• 100% magnaflux crack detection.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

G80 Lifting Swivel LTS Type, Metric Thread

G80 Lifting Swivel LTS Type, Metric Thread

• Compact and lightweight design with metric thread.
• Only be fitted on the assembly for lifting use.
• Can use as lashing point for the fixture of lashing.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

Lifting Point Metric Thread 8-211

Lifting Point Metric Thread

• Rotates through 360° and pivot 90°.
• Manufactured from alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

Anchor Point Metric Thread 8-231

Anchor Point Metric Thread

• Rotates through 360° and pivot 180°, and simultaneously allows lifting from any direction.
• Manufactured from alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

Swivel Point Metric Thread 8-271

• Pivots more than 230°, rotates through 360° due to its unique ball bearing design. Design factor 4:1 in all directions.
• Manufactured from alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

G80 Eye Bolt EBL Type

G80 Eye Bolt EBL Type

• Sizes are based on DIN 580 eye bolt.
• WLL for vertical lifting is marked on the eye.
• DRS type is equipped with a spring which enables the D ring to stay in the desired position.
• Quenched and tempered.
• 100% magnaflux crack detection.
• Standard: EN1677
• Material: Forged alloy steel
• Proof load at 2.5 times of the working load limit.
• Safety factor 4:1
• Powder coated surface finish.

Key Eye Point Metric Thread

Key Eye Point Metric Thread

• Rotates through 360° adjustable in the direction of the load.
• Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolts are Metric thread (ASME / ANSI B18.3.1M)
• Proof tested to 2.5 times the WLL.
• Fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

Swivel Hoist Ring with ball bearing

Swivel Hoist Ring with ball bearing

• Designed for lifting heavy loads.
• Rotates freely through 360° and make it easy to handle and turns it automatically in direction of load.
• Rotates through 360° and pivot 180°, rated at 100% at 90°angle.​
• Easy to install - needs only one tap hole
• Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor.
• 20,000 cycle fatigue rated to 1.5 times the WLL.​
• Self aligns in direction of load.
• L - Long Bolts are designed for soft metal work piece.

Swivel Hoist Ring with alloy steel washer

Swivel Hoist Ring with alloy steel washer

• Rotates through 360° and pivot 180°, rated at 100% at 90°angle.
• Manufactured from forged alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Individual forged parts and cap screw are traceable to Test Certification.
• Bolt are UNC thread (ASME/ ANSI B18.31M).
• Proof tested to 2.5 times the WLL.
• 20,000 cycle fatigue rated to 1.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• Quick and simple assembly, just a tapped hole is required.

G80 Eye Swivel

G80 Eye Swivel

• Design factor 4:1 proof tested and certified.
• Tested acc. to EN 1677

G80 Precast Concrete Lifting Clutch LTC Type

G80 Precast Concrete Lifting Clutch LTC Type

• Standard EN1677
• Quenched and tempered.
• 100% Magnaflux Crack Detection
• Proof Load tested at 2.5 times the WLL.
• Safety Factor 4:1.
• Powder coated or zinc plated surface finished.

Send us an enquiry ...

1 2 3 4 5 6 7 8 9 10 11