Lashing System/ Load Securement Polyester Synthetic Slings Wire Ropes Wire Rope Accessories Stainless Steel Products Chain Links Fittings Shackles Beam Clamp Hoists Snatch Blocks Lifting Clamp Hand Tools and Others Cable Installation Tools Turnbuckles Ropes Fall Protection and PPE Services

Wah Yong (M) Sdn Bhd
24, Jalan Mega 1/7,
Taman Perindustrian
Nusa Cemerlang
Iskandar Puteri,
79200 Johor, Malaysia.
+607-535 3380

Our Products

1 2 3 4 5 6 7 8 9 10 11


Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Bow Shackle With Screw Pin YOKE 8-837 (G-209BW)

Forged Carbon Steel Anchor Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.
Purchase online via https://shope.ee/8KFYt8zSmv


Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Bow Shackle With Screw Pin Grade S6 Shackle (G209 BW)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.
Purchase online via https://shope.ee/5UvNWO7jqi


Send us an enquiry ...



D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

D Shackle With Bolt Pin YOKE 8-805 (G-2150 DX)

Forged Alloy Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.
Purchase online via https://shope.ee/aQy1hFfU


D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

D Shackle With Bolt Pin YOKE 8-835 (G-2150)

Forged Carbon Steel Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.
Purchase online via https://shope.ee/3pn9X5wz3o


D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

D Shackle With Bolt Pin Grade S6 Shackle (G2150 DX)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load
  • While the WLL is less than 85t (including), the minimum breaking load is 6 times of the WLL.
  • While WLL is more than 85t, the minimum breaking load is 4 times of WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.
Purchase online via https://shope.ee/99oftCmoJ4


Send us an enquiry ...



D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

D Shackle With Screw Pin YOKE 8-804 (G-210 DW)

Forged Alloy Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by DNV & ABS.
  • Shackles are forged alloy steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.
Purchase online via https://shope.ee/6pQl6ftQyv


D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

D Shackle With Screw Pin YOKE 8-834 (G-210 DW)

Forged Carbon Steel Chain Shackle
Brand: YOKE
  • Shackles are Type Approved by ABS.
  • Shackles are forged carbon steel with alloy pin.
  • Size and the Working Load Limit permanently shown on each shackle.
  • All shackles with Batch Code which links to Test Certificate and quality traceability.
  • 100% magnaflux crack detection during manufacturing.
  • 20,000 cycle fatigue rated to 1.5 times Working Load Limit.
  • Galvanized finish.
Purchase online via https://shope.ee/2fbC8yjdZJ


D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

D Shackle With Screw Pin Grade S6 Shackle (G210 DW)

Brand: JULI
  • Made of high-quality alloy steel by die forging.
  • Each shackle will be marked with WLL permanently
  • The Maximum testing load is twice of the working load, the minimum breaking load is 6 times of the WLL.
  • Correspond with stipulated technical requirement and test approach in standard ISO2415-2004.
Purchase online via https://shope.ee/99oftAN5Au


Send us an enquiry ...



BEAM CLAMP TBC

BEAM CLAMP TBC

BEAM CLAMP TBC

Brand: KYOTO
Optional features: with Shackle
Capacity: 1T, 2T, 3T, 5T & 10T
Beam Width: 75 - 220mm, 80 - 230mm, 80 - 350mm

Send us an enquiry ...



KYOTO Plain Trolley VIT-II

KYOTO Plain Trolley VIT-II

Plain Trolley VIT-II

Brand: KYOTO
Capacity: 0.5T, 1T, 2T, 3T, 5T & 10T
Beam Width: 75 - 125mm, 100 - 1500mm, 125 - 175mm

 


JENTAN Plain Trolley JTPT-A

JENTAN Plain Trolley JTPT-A

Plain Trolley JTPT-A

Compact structure and small package size.
Brand: JENTAN
Capacity: 0.5T, 1T & 3T
Beam Width: 68 - 126mm, 80 - 146mm, 88 - 168mm
  • Travels along the lower edge of I-beam.
  • Applicable to factories, mine, wharf, dock, warehouses, construction site and machine room and etc.
  • Used to install the machine equipment and lift goods.
  • Suitable for the work environment without power.
  • Safety and simply maintenance.

Send us an enquiry ...



KYOTO Geared Trolley VIT-III

KYOTO Geared Trolley VIT-III

Geared Trolley VIT-III

Brand: KYOTO
Capacity: 1T,2T, 3T, 5T & 10T
Beam Width: 75 - 125mm, 100 - 150mm, 125 - 175mm & 125 - 210mm

 


JENTAN Geared Trolley

JENTAN Geared Trolley

Geared Trolley VIT-III

Compact structure and small package size.
Brand: JENTAN
Capacity: 1T, 2T, 3T, 5T & 10T
Beam Width: 80 - 146mm, 80 - 168mm, 88 - 168mm, 100 - 180mm & 122 - 203mm
  • Driven by pulling the hand chain and travels along the lower edge of I-beam.
  • Applicable to factories, mine, wharf, dock, warehouses, construction site and machine room and etc.
  • Used to install the machine equipment and lift goods.
  • Suitable for the work environment without power.
  • Safety and simply maintenance.
  • The distance between its wheels is easy to adjust and can be used in many kinds of I-beam.
  • It's so high transmission efficiency that do need less output.
  • It can be drived in a small turning diameter.
  • The hinge links the left and right-side plate to guarantee equal force.

Send us an enquiry ...



KYOTO Chain Block CK Type

KYOTO Chain Block CK Type

Chain Block CK Type

Competitive Chain Block with Industrial Performance
Brand: KYOTO
Capacity: 0.5T, 1T, 1.5T, 2T, 3T, 5T, 10T, 20T & 30T
  • Meets all pertinent world standards.
  • Hardened steel rollers supporting the load sheaves run smoother and last longer than bearings.
  • Spur gear efficiency reduces operator effort. Double pawl and double guide rollers enhance performance, safety and reliability.
  • Load chain is alloy steel Grade 80 according to ISO 1687.
  • Deformation indicators – two strategically placed marks allows for measurement to determine if the throat opening has changed thus indicating abuse or overload.
  • Equipped with wide throat top and bottom drop forged hooks that are designed to bend slowly to warn of overloads
  • Every chain block is operationally tested to % of the rated capacity and issued an individual test certificate with unique serial number.
  • Safety factor 4:1 of the rated capacity.
  • Easy remove top hook for 0.5t to 3t


JENTAN Chain Block G80 Alloy Steel

JENTAN Chain Block G80 Alloy Steel

Chain Block G80 Alloy Steel

Brand: JENTAN
Capacity: 1.5T & 20T
  • Small size, light weight, easy to carry
  • The adoption of low-alloy structural steel plates, more safe and long service life
  • Grade 80 high strength load chain, high safety factor, long service life
  • Steady rotation, high efficiency, light hand pulling force
  • Approved by CE, GS certificate
  • Double pawls, double load chain guide wheel ensure the safe working
  • Overload protection optioned

Send us an enquiry ...



KYOTO Lever Block VIT-II Type

KYOTO Lever Block VIT-II Type

Lever Block VIT-II Type

A dependable lever hoist with capacities and features that make it ideal for all industrial lifting, pulling and position applications.
Brand: KYOTO
Capacity: 0.75T, 1T, 1.5T, 2T, 3T & 6T
  • Meets all pertinent world standards.
  • All steel construction for external impact resistance.
  • High-strength, cold-formed, stamped steel construction makes it lighter in lighter in weight yet impact resistant for longer life.
  • Open frame design provides access for easy cleaning and inspection.
  • 360° degree handle rotation with short stroke to ratchet loads.
  • Rubber grip handle for a better comfortable operation, even without glove.
  • Easy free chaining operation.
  • Reinforced pinion shaft #8.
  • Forged alloy steel hooks have wide throat opening with deformation indicators. Hooks are designed to spread at 270 – 350% of the rated load to indicate a clear visual warning of hoist overload.


JENTAN Lever Block

JENTAN Lever Block

Lever Block 

Compact Design, Low Headroom - Wide Usage
Brand: JENTAN
Capactiy: 0.75T, 1T, 1.5T, 2T & 3T
  • Standard lift 1.5m
  • High Precision Machining Gears
  • Impact Resistance Gear Cover
  • Double Pawl Brake System – Reinforced Pawl, Ratchet Disc and Brake Disc
  • Three Stay Bolts Design – Suitable for Tightening Application
  • Modular Design – Quick Replacement Repair
  • Classic Safety Clutch Lever Design
  • Robust - Higher than 1500 cycles EN 13157 Endurance Testing

Send us an enquiry ...



Mini Electric Wire Rope Hoist EWH-E Type

Mini Electric Wire Rope Hoist EWH-E Type

Mini Electric Wire Rope Hoist EWH-E Type

Brand: HLIFT
Capacity: 250/500 kg
  • With built in upper and lower limited switches. Certified by CE, GS, EMC & RoHS.
  • Designed for safety, the stop bracket automatically shuts down the hoist if the line locker begins to pull it upwards, this prevents the spool and damaging the spool, cable or hoist.
  • With copper motor, which has good electrical conductivity.
  • Operation via pendant control handset complete with emergency stop button.
  • Non-rotating wire rope.
  • With a thermal protection device on the motor for added safety.
  • Motors protected to IP54 against dust and spray water.

Send us an enquiry ...



Light Snatch Block With Shackle 8-501

Light Snatch Block With Shackle 8-501

Light Snatch Block With Shackle

Groove bottom hardened to 35 Rc maximizes durability of Snatch Blocks.
Brand: YOKE
Capacity: 2T, 4T & 8T
  • Manufactured of the highest quality tensile steel.
  • Available from 2 tonnes to 8 tonnes, for wire rope sizes 8mm to 19mm.
  • Part number, wire rope size and working load limit are marked on each block.
  • Permanent batch codes link to test certificates for easy traceability.
  • Supplied with bronze bushings and 4.5”-14” with pressure lube fittings.
  • Meets or exceeds all requirements of ASME B30.26.
  • Safety factor 4:1
  • Fatigue rated
Purchase online via https://shope.ee/6AB4KNCXpj


Super Snatch Block With Shackle 8-551

Super Snatch Block With Shackle 8-551

Super Snatch Block With Shackle

Groove bottom hardened to 35 Rc maximizes durability of Snatch Blocks.
Brand: YOKE
Capacity: 20T
  • Manufactured of the highest quality tensile steel.
  • Part number, wire rope size and working load limit are marked on each block.
  • Permanent batch codes link to test certificates for easy traceability.
  • Supplied with bronze bushings and 4.5”-14” with pressure lube fittings.
  • Meets or exceeds all requirements of ASME B30.26.
  • Safety factor 4:1
  • Fatigue rated


Heavy Duty Snatch Block With Shackle

Heavy Duty Snatch Block With Shackle

Heavy Duty Snatch Block With Shackle

Brand: HLIFT
Capacity: 8T, 10T & 15T
  • Supplied with bronze bearing, and grease fitting nipples for ease of use and extended shelf life.
  • Coating assures long-term durability.
  • Lightweight
  • Side opening design allowed quick, easy insertion of rope or cable without treading.
  • Safety factor 4:1

Send us an enquiry ...



Light Snatch Block With Hook 8-502

Light Snatch Block With Hook 8-502

Light Snatch Block With Hook

Groove bottom hardened to 35 Rc maximizes durability of Snatch Blocks.
Brand: YOKE
Capacity: 2T, 4T & 8T
  • Manufactured of the highest quality tensile steel.
  • Available from 2 tonnes to 8 tonnes, for wire rope sizes 8mm to 19mm.
  • Part number, wire rope size and working load limit are marked on each block.
  • Permanent batch codes link to test certificates for easy traceability.
  • Supplied with bronze bushings and 4.5”-14” with pressure lube fittings.
  • Meets or exceeds all requirements of ASME B30.26.
  • Safety factor 4:1
  • Fatigue rated
Purchase online via https://shope.ee/5KbxKin7zc


Super Snatch Block With Hook 8-552

Super Snatch Block With Hook 8-552

Super Snatch Block With Hook

Groove bottom hardened to 35 Rc maximizes durability of Snatch Blocks.
Brand: YOKE
Capacity: 20T
  • Manufactured of the highest quality tensile steel.
  • Part number, wire rope size and working load limit are marked on each block.
  • Permanent batch codes link to test certificates for easy traceability.
  • Supplied with bronze bushings and 4.5”-14” with pressure lube fittings.
  • Meets or exceeds all requirements of ASME B30.26.
  • Safety factor 4:1
  • Fatigue rated


Single Wheel Snatch Block With Hook

Single Wheel Snatch Block With Hook

Single Wheel Snatch Block With Hook

Brand: HLIFT
Capacity: 0.5T, 1T, 2T, 3T & 5T
  • Sheave made of cast iron.
  • Powder metallurgy bushings provide improved oil retention.
  • Side opening design allowed quick, easy insertion of rope or cable without treading.
  • Safety factor 4:1
Purchase online via https://shope.ee/1L5oZIzi1w

1 2 3 4 5 6 7 8 9 10 11